Fixturing Tool Kit
Student Fixture Took Kit (103 Pieces)
The Student Welding Table Fixture Kit provides everything needed to introduce up to two students to basic welding techniques. All tools are sized for industry standard 16mm (5/8”) holes that are featured on our Welding Fixture Table. This 103-piece set includes clamps, stops, bolts, holders and other essential accessories that support hands-on learning and skill development. All components are packaged together for easy setup and classroom efficiency.
Plier Clamp
 |
Plier Clamp with 5” Jaw Opening |
|
Quantity |
Description |
|
| 4 | Drop into any standard 5/8? (16?mm) table hole and press down to lock material securely. Plier clamps are able to reach forward and get into spots that traditional T-handle clamps can’t always reach. | |
Clamp with T-Handle
 |
Clamp with T–Handle |
|
Quantity |
Description |
|
| 8 | These friction clamps quickly drop into any hole and can clamp vertically or horizontally by simply tightening the T-handle. They’ll clamp items up to 11″ tall, and can reach over 4″ to secure work pieces. | |
Variable Height Edge Stop
 |
Variable Height Edge Stop |
|
Quantity |
Description |
|
| 4 | Secure these to the table so you can push work pieces right up to the edge. Engage two edges to create perfect 90° angles! And combine with clamps to complete the workholding picture. | |
Side Clamp
 |
Side Clamp |
|
Quantity |
Description |
|
| 8 | Drop a side clamp in any hole on the table and you can turn the knob to put sideways pressure on any work piece. These can be combined with pin stops, edge stops or sliding stops to securely hold projects. | |
TMW Thread Block
 |
TMW ½” Thread Block |
|
Quantity |
Description |
|
| 16 | Convert any standard hole into a threaded hole by placing these magnetic threaded hole adapters under the table where you need them. | |
TMW Mag Block
 |
TMW Mag Block |
|
Quantity |
Description |
|
| 20 | Elevate your work above the surface of the table without affecting accuracy with these fully machined, extremely strong magnetic blocks measuring 1/2″ high and 2″ square. | |
Stop Pin
 |
Stop Pin |
|
Quantity |
Description |
|
| 8 | Plug-and-play pins for defining reference points or indexing repeat part placement. Great for layout guides or restraining movement during welding. | |
Sliding Stop – 2.5” Travel
 |
Sliding Stop – 2.5” Travel |
|
Quantity |
Description |
|
| 8 | Adjustable stop that slides and rotates within a fixed range for repeatable positioning. Combine these with side clamps to squeeze work pieces and hold them in place while welding. | |
Welding Table Fab Square - 10” x 10” x 4”
 |
Welding Table Fab Square – 10” x 10” x 4” |
|
Quantity |
Description |
|
| 4 | Rigid 90° square that bolts or clamps to the table to ensure perfect joint angles. Can also be mounted to the side of the table to extend the surface when a little extra space is needed. | |
½" x 1.5” Hex Bolts with Nuts and Washers
 |
½” x 1.5” Hex Bolts with Nuts and Washers |
|
Quantity |
Description |
|
| 20 | Standard fasteners for securing fixturing components, squares, angles or risers to the table. Provide a solid mechanical anchor for precision setups. | |
10” Combo Accessory Tool Holder
 |
10” Combo Accessory Tool Holder |
|
Quantity |
Description |
|
| 2 | Mounts to the table to keep pliers, clamps, and tooling within easy reach by hanging or shelf. Streamlines workflow by organizing your most-used tools. | |
Welding Table 20” Ring Angle Hanger Accessory
 |
Welding Table 20” Ring Angle Hanger Accessory |
|
Quantity |
Description |
|
| 1 | Holds right-angle tools, clamps, or rods – suspends tools conveniently by your workspace. Keeps surfaces clear while keeping tools nearby. | |
Advanced Fixture Tool Kit (147 Pieces)
Built for instructors and higher-level training, the Advanced Welding Table Fixture Kit takes welding education to the next level. With 147 pieces, it expands on the Student Kit with added tools like risers and extension bars that connect tables and expand the work area for larger, more complex projects. All components are sized for industry-standard 16mm (5/8”) holes, ensuring full compatibility with our Welding Fixture Table and the equipment students will use in the field. From clamps and blocks to specialty fixtures, this kit equips students to practice advanced techniques and build career-ready skills right at the table.
Plier Clamp
|
Plier Clamp with 5” Jaw Opening |
|
Quantity |
Description |
|
| 4 | Drop into any standard 5/8? (16?mm) table hole and press down to lock material securely. Plier clamps are able to reach forward and get into spots that traditional T-handle clamps can’t always reach. | |
Clamp with T-Handle
|
Clamp with T–Handle |
|
Quantity |
Description |
|
| 8 | These friction clamps quickly drop into any hole and can clamp vertically or horizontally by simply tightening the T-handle. They’ll clamp items up to 11″ tall, and can reach over 4″ to secure work pieces. | |
Variable Height Edge Stop
|
Variable Height Edge Stop |
|
Quantity |
Description |
|
| 4 | Secure these to the table so you can push work pieces right up to the edge. Engage two edges to create perfect 90° angles! And combine with clamps to complete the workholding picture. | |
Side Clamp
|
Side Clamp |
|
Quantity |
Description |
|
| 8 | Drop a side clamp in any hole on the table and you can turn the knob to put sideways pressure on any work piece. These can be combined with pin stops, edge stops or sliding stops to securely hold projects. | |
TMW Thread Block
|
TMW ½” Thread Block |
|
Quantity |
Description |
|
| 16 | Convert any standard hole into a threaded hole by placing these magnetic threaded hole adapters under the table where you need them. | |
TMW Mag Block
|
TMW Mag Block |
|
Quantity |
Description |
|
| 20 | Elevate your work above the surface of the table without affecting accuracy with these fully machined, extremely strong magnetic blocks measuring 1/2″ high and 2″ square. | |
Stop Pin
|
Stop Pin |
|
Quantity |
Description |
|
| 8 | Plug-and-play pins for defining reference points or indexing repeat part placement. Great for layout guides or restraining movement during welding. | |
Sliding Stop – 2.5” Travel
|
Sliding Stop – 2.5” Travel |
|
Quantity |
Description |
|
| 8 | Adjustable stop that slides and rotates within a fixed range for repeatable positioning. Combine these with side clamps to squeeze work pieces and hold them in place while welding. | |
Welding Table Fab Square - 10” x 10” x 4”
|
Welding Table Fab Square – 10” x 10” x 4” |
|
Quantity |
Description |
|
| 4 | Rigid 90° square that bolts or clamps to the table to ensure perfect joint angles. Can also be mounted to the side of the table to extend the surface when a little extra space is needed. | |
½" x 1.5” Hex Bolts with Nuts and Washers
|
½” x 1.5” Hex Bolts with Nuts and Washers |
|
Quantity |
Description |
|
| 20 | Standard fasteners for securing fixturing components, squares, angles or risers to the table. Provide a solid mechanical anchor for precision setups. | |
10” Combo Accessory Tool Holder
|
10” Combo Accessory Tool Holder |
|
Quantity |
Description |
|
| 2 | Mounts to the table to keep pliers, clamps, and tooling within easy reach by hanging or shelf. Streamlines workflow by organizing your most-used tools. | |
Welding Table 20” Ring Angle Hanger Accessory
|
Welding Table 20” Ring Angle Hanger Accessory |
|
Quantity |
Description |
|
| 1 | Holds right-angle tools, clamps, or rods – suspends tools conveniently by your workspace. Keeps surfaces clear while keeping tools nearby. | |
Welding Table Lift Hooks – Set of 4
 |
Welding Table Lift Hooks – Set of 4 |
|
Quantity |
Description |
|
| 2 | Hooks that attach to table edges for lifting, moving, or repositioning the table securely. Adds safe and ergonomic handling for heavy table components. | |
Welding Table Fab Square 25” x 10”x 4”
 |
Welding Table Fab Square 25” x 10”x 4” |
|
Quantity |
Description |
|
| 2 | Larger 90° fixture square for welding long or wide assemblies. Provides sturdy reference edge for layouts and large-scale alignment. | |
Welding Table Riser 6??×?6??×?20?
 |
Welding Table Riser 6??×?6??×?20? |
|
Quantity |
Description |
|
| 2 | Raises work up to create clamp clearance underneath or lift part heights. Useful for multi-level fixturing and preventing obstruction by clamp hardware. Can also be attached to the side of table to expand worksurface horizontally! | |
Welding Table Extension 10” x 10” Vise Mount
 |
Welding Table Extension 10” x 10” Vise Mount |
|
Quantity |
Description |
|
| 2 | Our vise mounts include a specific pattern which works with the majority of major brand vises on the market, and can also be used for mounting grinders and other small tools. You can also use them to bridge tables together or increase the surface area for bigger projects. | |
V-Blocks
 |
V-Blocks |
|
Quantity |
Description |
|
| 16 | Classic V-shaped blocks for supporting round stock or cylindrical parts. Stabilize pipes or tubes during weld or layout. | |
Ball Lock Pins 5/8”
 |
Ball Lock Pins 5/8” |
|
Quantity |
Description |
|
| 20 | Quick-release pins that lock into holes – ideal for fast repositioning of accessories. Perfect for tool-free adjustments when switching between fixtures. | |